How to Reset Power Bank-Step By Step Guide

Power banks have become an essential accessory for our increasingly connected lives. Whether it’s charging our smartphones, tablets, or other devices on the go, these portable power sources provide convenience and peace of mind. Power banks could, however, experience problems that call for a reset in order to make them usable again, just like any other electrical item. In this comprehensive guide, we will explore the reasons behind power bank resets, the precautions to take, and a step-by-step walkthrough on how to reset your power bank effectively.

So, if you’ve ever wondered how to troubleshoot your power bank and get it back in working order, this article is for you. Let’s dive in and learn how to reset your power bank like a pro.

Understanding Power Banks

Power banks are portable charging devices that store electrical energy for later use. They serve as a convenient backup power source, allowing you to recharge your devices when you’re away from traditional power outlets. To effectively reset a power bank, it’s important to have a basic understanding of its components and functions.

A. Components and Functions

  1. Battery Cells: Power banks typically use lithium-ion or lithium-polymer battery cells. These cells store and release electrical energy as needed.
  2. Input Port: This is where you connect the power bank to a power source, such as a wall adapter or a USB port on your computer, to recharge its internal battery.
  3. Output Ports: Power banks feature one or more output ports to connect and charge your devices. These ports may include USB-A, USB-C, or other proprietary connectors.
  4. Power Button: The power button turns the power bank on and off, and it may also have additional functions such as displaying battery level or activating quick charging modes.
  5. LED Indicators: Many power banks have LED indicators that provide information about battery status, charging progress, or other important notifications.

How to Reset Power Bank-Step By Step Guide

B. Common Issues that Require a Reset

  1. Device Freezing: Sometimes, power banks may freeze or become unresponsive due to internal errors or software glitches. Resetting the power bank can help resolve this issue.
  2. Charging Problems: If your power bank is not charging your devices or is not charging itself properly, a reset may solve the problem by recalibrating the internal circuitry.
  3. Performance Degradation: Over time, power banks may experience a decrease in charging capacity or overall performance. Resetting can help refresh the internal system and potentially improve performance.

Understanding the components and common issues associated with power banks is crucial before attempting a reset. In the following sections, we’ll delve into the necessary precautions you should take and provide a step-by-step guide to reset your power bank effectively.

Precautions Before Resetting

Before diving into the process of resetting your power bank, it’s essential to take some precautions to ensure your safety and the longevity of the device. Here are a few critical actions to take:

A. Checking the User Manual:

Refer to the user manual or manufacturer’s website for specific instructions on resetting your power bank. Different models may have varying reset methods, and it’s crucial to follow the recommended guidelines to avoid any potential issues.

B. Verifying Warranty and Support:

If your power bank is still under warranty, contact the manufacturer or authorized service center before attempting a reset. They can provide guidance, troubleshoot the issue, or offer a replacement if necessary. Altering the device without proper authorization may void the warranty.

C. Disconnecting from Power Sources:

Ensure that your power bank is disconnected from any devices, chargers, or power sources before proceeding with the reset. This step prevents any potential electrical surges or damage to your devices during the process.

D. Checking Battery Level:

It’s advisable to perform a reset when your power bank has a reasonable amount of charge remaining. A low battery level during the reset process may lead to incomplete or unsuccessful reset attempts.

E. Backup Important Data:

If your power bank has any built-in data storage or features that may be affected by the reset, consider backing up any important data or configurations before proceeding. This step helps prevent data loss or the need to reconfigure your power bank settings after the reset.

Taking these precautions ensures that you approach the power bank reset process with the necessary information and safeguards. In the next section, we’ll provide a step-by-step guide on how to reset your power bank effectively, based on general methods used by most power bank models.

Step-by-Step Guide to Resetting a Power Bank

Now that you’ve completed the appropriate security measures, let’s go over how to reset your power bank in general. Please note that specific power bank models may have unique reset methods, so refer to your user manual for model-specific instructions if available. Use the following procedures as a general outline:

Step 1:

Disconnecting from All Devices

  1. Unplug any devices connected to the power bank’s output ports.
  2. Ensure that the power bank is not connected to any charging source.

Step 2:

Draining the Power Bank To initiate a reset, you’ll need to completely drain the power bank of its remaining charge.

There are two popular ways to do this:

Discharging Method 1: Natural Drainage

    1. Leave the power bank idle in a safe place without any load or charging for a few days.
    2. The power bank’s internal circuitry will gradually deplete the battery until it is completely drained.

Discharging Method 2: Power Button Press

    1. Locate the power button on your power bank.
    2. Press and hold the power button for approximately 10-15 seconds.
    3. The power bank’s LEDs may flash or turn off, indicating that the residual charge is being discharged.

Step 3:

Recharging the Power Bank After draining the power bank, it’s time to recharge it to restore its functionality. Follow these steps:

  1. Connect the power bank to a suitable charging source, such as a wall adapter or USB port on your computer.
  2. Use the provided charging cable or a compatible cable to connect the power bank to the charging source.
  3. Allow the power bank to charge fully, following the recommended charging time mentioned in the user manual or provided by the manufacturer.
  4. Pay attention to the LED indicators, which will typically show the charging progress or battery level.

Step 4:

Testing the Reset Once the power bank is fully charged, it’s time to test if the reset was successful. Perform the following checks:

  1. Connect a device to the power bank’s output port.
  2. Verify if the power bank is providing a stable charge to the connected device.
  3. Monitor the power bank’s performance and ensure that it is functioning as expected.

If the reset process was successful, your power bank should now be reset and ready for use. However, if the issues persist or the reset did not solve the problem, it may be necessary to seek further assistance from the manufacturer’s support or a professional technician.

Additional Tips and Troubleshooting

Resetting your power bank is a helpful step to resolve common issues, but there may be other factors contributing to the problem. Here are some additional tips and troubleshooting suggestions to consider:

Resetting Specific Power Bank Models:

Some power banks may have unique reset methods or button combinations specific to their model. Refer to the user manual or manufacturer’s website for detailed instructions on resetting your particular power bank model.

Handling Persistent Issues:

  1. Overheating: If your power bank tends to overheat during charging or usage, it may indicate a faulty battery or internal component. Discontinue use immediately, contact the manufacturer’s support, and avoid attempting further resets.
  2. Battery Capacity Loss: Over time, power bank batteries can experience a decrease in capacity, resulting in shorter usage times. If this persists even after a reset, it may indicate the need for a battery replacement.
  3. Charging Malfunctions: If your power bank consistently fails to charge your devices or does not hold a charge, try using a different charging cable, adapter, or charging source. Faulty cables or adapters can affect charging performance.

Updating Firmware:

Some power banks can be updated with the latest firmware provided by the manufacturer. Check the manufacturer’s website or contact their support to inquire about firmware updates that may address known issues and improve performance.

Proper Maintenance:

  1. Keep your power bank in a cool and dry environment to prevent overheating and damage.
  2. Avoid exposing your power bank to extreme temperatures, direct sunlight, or moisture, as these conditions can affect its performance and longevity.
  3. Regularly clean the charging ports and connectors using a soft, dry cloth to remove dust or debris that may interfere with charging.

Remember, if your power bank continues to experience persistent issues or poses safety concerns, it’s best to reach out to the manufacturer’s support for professional assistance or consider replacing the power bank if it is no longer under warranty.

Safety Considerations

While resetting your power bank, it’s crucial to prioritize safety. Here are some things to bear in mind about safety:

Using Certified Charging Cables and Adapters:

Always use cables and adapters that are certified and compatible with your power bank. Using uncertified or incompatible accessories may damage your power bank or pose a safety risk.

Avoiding Physical Damage:

Handle your power bank with care and avoid dropping, crushing, or exposing it to undue force. Physical damage can affect its performance and compromise safety.

Adhering to Manufacturer Guidelines:

Follow all instructions provided by the manufacturer regarding usage, charging, and resetting procedures. Failure to do so may result in damage to the power bank or personal injury.

Also Read: Power Bank Light Not Blinking-Step By Step Guide


By following this comprehensive guide, you now have the knowledge and steps required to reset your power bank effectively. Remember to take precautions, refer to the user manual, and prioritize safety during the reset process.

If the issues persist, don’t hesitate to reach out to the manufacturer’s support for further assistance. Power banks are valuable tools for keeping our devices charged on the go, and with proper care and maintenance, they can continue to serve us reliably. Stay powered up and connected!

Leave a Comment